Slim Line Dipper
The slim line dipper is specifically designed for access into narrow tubes and small bolt holes. The sensor is only 12mm diameter, and the tape is just over 6mm wide – (compared to our standard range which has a tape width of 12mm and a probe width of 17mm).Hence it is very useful for where there is a restricted access point.
Like our standard range, it can may be used to measure water levels in wells, boreholes, water tables, aquifers and large tanks, to make drawdown tests, and to calculate volume/time recovery rates.
Features:
- Drawdown feature included – selected by knob on front of the unit – unit activates out of water and deactivates when in water
- Rugged construction, with durable light weight ABS case and reel assembly
- Tape Material is PVC coated fibreglass with embedded copper wire
- Tape is 6mm wide and 2mm thick
- Tape graduated in cm and metres – the black and red markings on the white tape are very easy to read
- Narrow but thick tape minimises the chances of sticking to the inside of the pipe or borehole
- Probe is only 12mm in diameter and is very useful for small access points and thin pipes
- Sensitivity knob for accuracy of signal in differing borehole conditions, foam and cascading water
- Battery easily accessed from front panel
- One-year parts and labour warranty
Tape and Probe
The tape is graduated in cm and metres. The white background and black and red markings are easy to read. Numerals are provided every ten cm with a marker at each cm and a special marker for the 5cm graduation. The tape is narrow – only 6cm wide – to minimise the chances of sticking to pipes in the borehole, or the side of the borehole. It is 2mm thick which provides strength and durability.
Key Features of the 50m and 100m Slim Line Water Level Dipper
Specifications for the 50 and 100m Water Level Meter
|
Reel Dimensions: Height overall – 385mm |
Weights: 30m – 2.5kg 50m – 3kg |