| Accessory Splitter |
 |
Connect multiple devices to your Well Sounder in addition to the probe, such as the flow meter or analog output adapter. Part #5220. |
| 10′ Probe Extension Cable |
 |
Extend the reach of your probe or accessory by 10 feet. Part #5201-10. |
| 25′ Probe Extension Cable |
| |
Extend the reach of your probe or accessory by 25 feet. Part #5201-25. |
| Plug-in 120V AC Power Adapter |
 |
This cable allows you to bypass the standard 6 AA battery power by plugging the Well Sounder into a standard power outlet. Part #5300. |
| 12VDC Power Cable with 1/4in Push-On Lugs |
 |
This cable allows you to bypass the standard 6 AA battery power by plugging the Well Sounder into a 12VDC power source such as a sealed lead acid battery or solar panel. Part #5302. |
| Breakout Adapter |
 |
This adapter provides screw terminals to allow the Well Sounder to connect to industry standard flow meters with switched or TTL level inputs, it also allows connection to the Well Sounder’s 0-5 VDC alarm output signal. (Also requires the Accessory Splitter) |
| Analog Output Adapter |
 |
This adapter produces an analog output signal, both 0-5volts and 4-20ma, or the 0-5volt alarm signal from the from the version 2026 or later Well Sounder Pro. (Also requires the Accessory Splitter). |
| Flow Meter |
 |
The flow meter can be attached to the well sounder using the accessory splitter so that the well sounder can measure and record the pumped water from the well. This will enable the well sounder to calculate and display the drawdown and recovery rates automatically. (Also requires the Accessory Splitter). |
